Configuring & Deploying Device Templates on vEdge1

This SD-WAN lab practical will show you how to configure Feature Templates for OSPF for VPN0. You can practice along with this practical using our SD-WAN virtual lab.

Topology

Tasks 

1. Configure a Device Template with the following parameters for HQ vEdge cloud devices 

● Template Name: HQ-VE-TEMP  

● Description: HQ-VE-TEMP-Description 

● Basic Information  

✓ System->VE-System  

● Transport & Management  

✓ VPN 0: HQ-VE-VPN-VPN0  

✓ VPN Interface: HQ-VE-VPNINT-VPN0-G0  

✓ BGP: HQ-VE-BGP-VPN0  

✓ VPN 1: HQ-VE-VPN-VPN1  

✓ VPN Interface: HQ-VE-VPNINT-VPN1-G1 

✓ OSPF: HQ-VE-OSPF-VPN1 

✓ VPN512: HQ-VE-VPN-VPN512 

✓ VPN512 Interface: HQ-VE-VPINT-VPN512-Eth0 

2. Attach HQ vEdge1 cloud device to the Device Template “HQ-VE-TEMP” with the following variable parameters  

●  Interface IP for Ge0/1:10.1.2.1/24  

●  Default Gateway for VPN0: 10.1.1.2  

●  Interface IP for Ge0/0:10.1.1.1/24  

●  Hostname: vEdge1  

●  System IP: 10.1.1.21  

●  Site ID: 1

Online Cisco SD-WAN TrainingLearn from expert trainers and master SD-WAN.Explore course

Configuration and Verification

Configure a Device Template with the following parameters for HQ vEdge cloud devicesThis is the path to create the Template Setting>Configuration >Templates >Device >Create Template  

Click on Create Template then select “From Feature Template” 

Fill the parameters as given- Template Name: HQ-VE-TEMP Description: HQ-VE-TEMP-Description 

Fill the Basic Configuration as given System->VE-System

Now select Transport & Management VPN and fill the details as given

Fill the VPN512 details on right click on VPN Interface

Now select Service VPN and fill the details as given in task then click on update to continue

Here we are able to see our HQ-VE-VPN-VPN0 device Template is created

Now click on three dots

Select “Attach Devices”

Select vEdge1 from right panel and click on arrow and then click on Attach 

Here vEdge1 attached as shown 

Now click on three dots then select “Edit Device Template” 

Fill the details as given and click on Update to continue 

g15

Here we are able to see vEdge1 attached  

Now click on device template configuration and verify the configuration VPN0 and Interface ge0/0

verify the configuration VPN1 and VPN512 then click on Configure Devices. 

The configuration automatically push on vEdge1  

To verify the configuration go to Site-1 and enter command “show ip route”  

We are able to ping our site-1 loop ip address 

Now on vEdge1 we are able to see ospf neighbour.